V-belt Optibelt X22 x 2725

OPTIBELT X22 x 2725 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for X22 x 2725 and any equivalents.

This Optibelt Super TX M=S is a cogged classical V-belt with a CX profile and a length of 2725 mm. Cogged classical belts of this type are used on industrial drives where a standard classical cross-section is required and the pulley diameters are small enough that a cogged construction helps the belt run cooler and flex more easily. The part number to reference is X22 x 2725.

If you are replacing a belt on a drive that takes a CX cross-section, confirm the fit by checking two things on the old belt: the profile marking on the back and the length. This belt is profile CX and 2725 mm long. Compare those two values with the belt you are removing before you order. If the old belt is worn or the marking is unreadable, measure the outside length and note the cross-section from the pulley groove.

Cogged classical V-belts are common on fans, pumps, compressors and other industrial equipment that runs continuously. The cogged underside is intended for drives with smaller pulleys, where a smooth classical belt would run hotter and wear faster. When you replace a belt on a multi-belt drive, check the condition of the other belts and the pulley grooves at the same time.

To request a quote, send the part number X22 x 2725 by WhatsApp or email. If you are unsure whether this is the correct belt for your drive, include the profile and length from the old belt, or a photo of the marking on its back, and the team can help confirm the right belt or suggest an equivalent.