V-belt Optibelt X17 x 929

OPTIBELT X17 x 929 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for X17 x 929 and any equivalents.

This Optibelt Super TX M=S belt is a cogged classical V-belt with a BX profile and a 929 mm length. Cogged classical V-belts are used on drives where the pulley diameters are small and the belt must flex around them without slipping. Confirm fit by matching the profile and the length to the belt you are replacing.

On a maintenance or engineering check, the two values that matter are the profile and the length. This belt is profile BX and 929 mm. If the drive uses BX pulleys and the routing calls for that length, this is the correct size. The cogged construction is suited to compact drives where a standard wrapped belt would run hot or slip.

The most reliable way to confirm a replacement is to read the marking on the back of the old belt. Look for the profile and the length, and compare them with BX and 929 mm. If the old belt is worn or the marking is gone, measure the outside length and check the pulley groove width before ordering.

When you request a quote, send the part number X17 x 929 and the profile and length. If the drive runs more than one belt, note how many are on the set so the replacement can be matched. Our team can help confirm the right belt or suggest an equivalent from the data you provide.