V-belt Optibelt X17 x 2240
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- BX
- Series
- Super TX M=S
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT X17 x 2240 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for X17 x 2240 and any equivalents.
The Optibelt X17 x 2240 is a cogged classical V-belt in the Super TX M=S series, built with a BX profile and a 2240 mm length. Before you fit it, take a few minutes to look over the drive so the new belt starts clean and runs true.
Start with the sheaves. Check groove wear, look for ridges, cracks or a polished floor, and confirm the grooves are clean and free of oil or debris. A worn groove lets a new belt sit too low, so it slips and wears out early. Check both sheaves for alignment with a straightedge across the faces; misalignment is a common cause of short belt life.
Next, check the rest of the drive. Spin the sheaves by hand and feel for rough or noisy bearings. Confirm the motor and driven shafts turn freely. Set the center distance so the belt drops into the grooves without forcing it, then tension it and recheck after the first run-in period.
The belt is marked X17 x 2240, with a BX profile and a 2240 mm length. If you are replacing an existing belt, read the marking on the back and match it, or send us that number and we will confirm the right belt or suggest an equivalent.
Dimensions
- Section
- BX
- Length
- 2240mm
Frequently asked questions
- How do I confirm this belt fits my drive?
- Check the marking on the back of the old belt. It should read X17 x 2240, or show a BX profile and a 2240 mm length. Send us that number and we will confirm the match.
- What should I inspect before fitting a new belt?
- Check the sheave grooves for wear, cracks and contamination, verify sheave alignment, and feel the bearings for roughness. Correct these first so the new belt runs true.
- How do I request a quote?
- Send the part number X17 x 2240 by WhatsApp or email. If you are unsure of the number, send the marking from the old belt and we will help confirm the right belt or suggest an equivalent.