V-belt Optibelt X17 x 2174
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- BX
- Series
- Super TX M=S
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT X17 x 2174 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for X17 x 2174 and any equivalents.
This Optibelt Super TX M=S belt is a cogged classical V-belt with a BX profile and a 2174 mm length. Cogged classical belts of this type are common on industrial drives where the pulley diameters are small enough that a raw-edge, notched construction runs cooler and grips better than a plain wrapped belt.
Typical service is on drives such as fans, pumps, compressors, conveyors and other plant machinery that use classical B, BX or B-section pulleys. The molded cogs on the underside let the belt flex around smaller sheaves without the heat buildup that shortens the life of a standard wrapped belt.
To confirm fit, read the marking on the back of the old belt and match the profile and length. A BX profile means a classical B cross-section in a cogged construction, and 2174 mm is the datum length. Check the sheave groove width and the number of grooves in the drive before ordering.
If the old belt is worn or the marking is unreadable, measure the outside circumference and the top width, and count the ribs or grooves on the pulleys. Send the part number, the profile and the length by WhatsApp or email and we will confirm the belt or suggest an equivalent.
Dimensions
- Section
- BX
- Length
- 2174mm
Frequently asked questions
- What does the code X17 x 2174 mean on this Optibelt belt?
- The code identifies the belt in the Optibelt Super TX M=S range. The profile is BX and the length is 2174 mm. Use those two values to match the belt to your drive.
- How do I confirm this belt fits my drive?
- Read the marking on the back of the belt you are replacing and compare the profile and length. If the marking is gone, measure the outside circumference, measure the top width, and check the pulley groove dimensions.
- What should I send to get a quote?
- Send the part number X17 x 2174, the profile BX and the length 2174 mm, along with a photo of the old belt marking if you have one. We reply by WhatsApp or email.