V-belt Optibelt X17 x 1716
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- BX
- Series
- Super TX M=S
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT X17 x 1716 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for X17 x 1716 and any equivalents.
This Optibelt Super TX M=S belt is a cogged classical V-belt with a BX profile and a 1716 mm length. Cogged classical V-belts are used on drives where a standard wrapped belt runs hot or slips, such as fans, pumps, blowers, compressors and general industrial machinery.
To confirm fit, read the marking on the back of the old belt. Match the profile BX and the length 1716 mm against the belt you are replacing, and check that the cross-section sits correctly in the pulley groove. If the old belt is worn, stretched or unreadable, measure the outside length and compare it with 1716 mm before ordering.
Inspect the drive before replacement. Check pulley grooves for wear, alignment and debris, and confirm the belt tension is set to the drive manufacturer's specification. On multi-belt drives, replace all belts at the same time so the load is shared evenly and the new belt does not take up the slack of worn ones.
Send the part number X17 x 1716 by WhatsApp or email to request a quote. If you are unsure whether this BX profile and 1716 mm length is the right match, include the old belt marking and a photo of the drive, and the team can help confirm the correct belt or suggest an equivalent.
Dimensions
- Section
- BX
- Length
- 1716mm
Frequently asked questions
- How do I confirm this Optibelt Super TX M=S belt fits my drive?
- Check the marking on the back of the belt you are replacing. It should show the BX profile and a length of 1716 mm. Also verify the belt sits correctly in the pulley groove and that the drive is designed for a BX cross-section.
- What should I send to request a quote for this belt?
- Send the part number X17 x 1716 by WhatsApp or email. If you want the team to confirm the match, include the old belt marking and a photo of the drive and pulleys.
- Should I replace all belts on a multi-belt drive at once?
- Yes. On drives using more than one belt, replace the full set together so tension and load are shared evenly. Mixing new and worn belts can cause the new belt to carry more load and wear faster.