V-belt Optibelt X13 x 995
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- AX
- Series
- Super TX M=S
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT X13 x 995 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for X13 x 995 and any equivalents.
The Optibelt X13 x 995 Super TX M=S is a cogged classical V-belt in AX profile with a 995 mm length. It is the belt to reach for when you are replacing an existing drive belt and want to match profile and length before anything else.
Start by reading the marking on the back of the belt you are removing. The profile and length on that belt are what you match: this Optibelt belt carries an AX profile and a 995 mm length. A cogged classical V-belt with the same profile and length is the direct replacement for the belt on the drive.
If the old belt is worn, frayed or has lost its marking, check the drive itself. Confirm the sheave groove width accepts an AX profile belt, and measure the belt path length to verify the 995 mm figure. When the profile and length line up, the Optibelt X13 x 995 Super TX M=S is the correct match.
For a quote, send the part number X13 x 995, or the profile and length from the old belt. If you are unsure, a photo of the belt marking and the drive helps us confirm the right belt or suggest an equivalent.
Dimensions
- Section
- AX
- Length
- 995mm
Frequently asked questions
- How do I confirm this belt matches the one I am replacing?
- Check the marking on the old belt: it should show an AX profile and a 995 mm length. If it does, the Optibelt X13 x 995 Super TX M=S is the matching belt.
- What if the old belt marking is unreadable?
- Measure the sheave groove to confirm it takes an AX profile, and measure the belt length along the path to verify 995 mm. If both match, this belt fits.
- What do I need to send for a quote?
- Send the part number X13 x 995, or the profile and length from your old belt. A photo of the belt marking and the drive can help us confirm the match.