V-belt Optibelt X13 x 955
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- AX
- Series
- Super TX M=S
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT X13 x 955 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for X13 x 955 and any equivalents.
The Optibelt Super TX M=S is a cogged classical V-belt with an AX profile and a 955 mm length. Before fitting a replacement, inspect the drive and sheaves to confirm the belt is the right fit and the drive is in good condition.
Check the sheave grooves for wear, rust, or debris. Worn sheaves can quickly damage a new belt, so measure groove width and look for a step where the belt rides. Confirm the sheave alignment with a straightedge or laser. Misalignment causes uneven wear and noise.
Verify the required belt profile and length against the drive. This belt has an AX profile and a 955 mm length. If the old belt is stretched or damaged, use the marking on its back to confirm the part number. Do not rely on a used belt for length.
When replacing a belt on a multi-belt drive, install a full set of new belts. Mixing new and used belts can cause uneven load sharing. After installation, recheck tension and alignment. Send the part number X13 x 955 for a quote.
Dimensions
- Section
- AX
- Length
- 955mm
Frequently asked questions
- What should I check on the sheaves before fitting this belt?
- Inspect the sheave grooves for wear, rust, or debris. Check alignment and confirm the groove profile matches the AX profile.
- Can I replace just one belt on a multi-belt drive?
- No. Replace all belts in the set at the same time to maintain even tension and load sharing.
- How do I confirm the belt I need?
- Look for the marking on the back of the old belt, such as X13 x 955, and verify the profile and length. If unsure, send us the part number and details.