V-belt Optibelt X10 x 947
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Series
- Super TX M=S
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT X10 x 947 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for X10 x 947 and any equivalents.
This Optibelt X10 x 947 belt is a cogged classical V-belt in the Super TX M=S series. It has a ZX profile and a length of 947 mm. Use these three details to match it to the belt you are replacing.
The most reliable way to match a replacement is to read the marking on the back of the old belt. Look for the profile, the length and the part number. If the old belt is worn or the marking is unreadable, measure the outside length and compare it to 947 mm. Also confirm the cross-section matches the ZX profile.
Cogged classical V-belts are used on drives where a standard wrapped belt may not bend easily around small pulleys. The cogs on the underside improve flexibility and help the belt run cooler. When you replace a cogged belt, use a cogged belt of the same profile and length. Do not substitute a wrapped belt unless the drive manufacturer allows it.
Before installing the new belt, inspect the pulleys for wear, oil or debris. Check that the pulleys are aligned and that the belt sits correctly in the grooves. After installation, check tension according to the drive manufacturer's instructions. Re-tension after the first few hours of running.
Dimensions
- Section
- ZX
- Length
- 947mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Check the marking on your old belt. It should show the profile ZX and the length 947 mm. If it does, this Optibelt X10 x 947 is the correct match. If the marking is missing, measure the outside length and compare it to 947 mm.
- Can I use this belt to replace a non-cogged V-belt?
- Only if the drive manufacturer permits it. Cogged and wrapped belts of the same profile and length can sometimes interchange, but the drive's requirements take priority. When in doubt, replace a cogged belt with a cogged belt.
- What information do I need to request a quote?
- Send us the part number X10 x 947, or the profile ZX and length 947 mm. If you have the old belt, include a photo of the marking. We will confirm the belt and reply by WhatsApp or email.