V-belt Optibelt X10 x 897
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Series
- Super TX M=S
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT X10 x 897 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for X10 x 897 and any equivalents.
The Optibelt X10 x 897 is a cogged classical V-belt in the Super TX M=S series. It is built to the ZX profile with a length of 897 mm. If you are replacing a belt on an existing drive, this page covers what to check before you order.
The most reliable way to match a replacement is to read the marking on the back of the belt you are removing. Compare it against the code X10 x 897, the profile ZX and the length of 897 mm. A belt that has been running may have stretched or worn, so the printed code is a better reference than a measurement taken from the old part.
Confirm the profile and the length before you commit. ZX identifies the cross-section, and 897 mm identifies the length. If the old belt is unreadable, send us the drive details and any photos of the belt and pulleys, and we will help confirm the right belt or suggest an equivalent.
Cogged classical V-belts like this one are commonly replaced as part of routine drive maintenance. Inspect the pulleys for wear and alignment while the belt is off, and replace belts in sets where a drive runs more than one. Send the part number by WhatsApp or email and our team will reply promptly with a quote.
Dimensions
- Section
- ZX
- Length
- 897mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Start with the marking on the back of the belt you are replacing. It should read X10 x 897, with the profile ZX and a length of 897 mm. If the marking is worn off, send us the drive details and photos and we will help confirm it.
- What do I need to send for a quote?
- Send the part number X10 x 897 by WhatsApp or email. If you are unsure of the number, include the profile, the length and any photos of the old belt and the pulleys.
- Should I replace more than one belt at a time?
- On drives that run multiple belts, replacing them as a set helps keep tension even across the drive. Inspect the pulleys for wear and alignment at the same time.