V-belt Optibelt X10 x 822
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Series
- Super TX M=S
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT X10 x 822 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for X10 x 822 and any equivalents.
When you need to match a belt on an existing drive, start with the marking on the back of the old belt. This page covers the Optibelt X10 x 822 from the Super TX M=S series, a cogged classical V-belt with a ZX profile and an 822 mm length. Use it to confirm the part number before you request a quote.
The marking on a belt back typically carries the profile and the length, and that is exactly what you compare here. This Optibelt belt is listed as X10 x 822, a cogged classical V-belt in the ZX profile with a length of 822 mm. Read the old belt's marking carefully, note the profile and the length, and check them against this listing. If the marking is worn or unreadable, measure what you can and send the drive details with your request.
Cogged classical V-belts are used where a standard classical profile is specified and the drive layout calls for the flexibility of a cogged construction. The ZX profile and 822 mm length are the two values that identify this belt. Confirm both before ordering so the replacement matches the original specification.
Dimensions
- Section
- ZX
- Length
- 822mm
Frequently asked questions
- How do I read the marking on my old belt?
- Look for the profile and the length on the back of the belt. On this Optibelt belt the marking is X10 x 822, which corresponds to the ZX profile and an 822 mm length. Clean the belt if the marking is dirty, and note the characters exactly as they appear.
- What should I send to request a quote for this belt?
- Send the part number X10 x 822, or the profile and length from the old belt marking. You can send it by WhatsApp or email. If you have a photo of the marking or the drive, include it so the team can help confirm the right belt.
- Can you help if the marking on my belt is unreadable?
- Yes. Send the drive details and any measurements you can take, along with a photo if possible. The team will review the information and help confirm the correct belt or suggest an equivalent.