V-belt Optibelt X10 x 772
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Series
- Super TX M=S
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT X10 x 772 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for X10 x 772 and any equivalents.
The Optibelt X10 x 772 is a cogged classical V-belt in the Super TX M=S series. It has a ZX profile and a length of 772 mm. This page gives maintenance and purchasing teams the key details needed to match or replace this belt.
The ZX profile indicates a classical V-belt cross-section with a cogged underside. The 772 mm length is the datum length for this belt. When reading a belt marking, the profile and length are the two values that must match the drive. The X10 x 772 code identifies this specific size within the Optibelt Super TX M=S line.
Cogged classical V-belts are used where a standard classical profile is required and some flexibility or heat dissipation is helpful. The cogged design can reduce bending stress on smaller pulleys compared to a smooth classical belt. This belt is a direct replacement when the existing belt shows ZX and 772 mm on its back.
To request a quote, send the part number X10 x 772, or the profile and length from your old belt. If the marking is worn, measure the outside length and cross-section, and include a photo of the belt and pulley arrangement. We carry Optibelt belts and can confirm the correct item for your drive.
Dimensions
- Section
- ZX
- Length
- 772mm
Frequently asked questions
- What do the profile and length mean on this belt?
- The profile ZX is the cross-section type, a classical V-belt with a cogged underside. The length 772 mm is the datum length. Both must match your drive for correct fit and tension.
- Can I use this belt to replace a worn one?
- Yes, if your old belt is marked ZX and 772 mm, or if the drive was originally specified for this size. Always compare the profile and length before ordering.
- What should I send to get a quote?
- Send the part number X10 x 772, or the profile and length from your belt. If the marking is unreadable, provide the outside length, cross-section, and a photo of the drive.