V-belt Optibelt SPZ 862
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- SK metric profile V-belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT SPZ 862 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 862 and any equivalents.
This is an Optibelt SPZ 862 narrow wedge V-belt from the SK metric profile line. It is a metric-profile belt for compact, high-speed industrial drives where space at the pulley is limited and a standard-section belt would be too wide. Confirm fit by matching the profile and the length marked on the belt you are replacing.
Narrow wedge belts like this one are common on machine tools, pumps, fans, compressors and similar driven equipment built to metric dimensions. Because the SPZ section is narrower than a classical V-belt of comparable capacity, it runs in smaller pulleys and takes up less room in the drive guard. If your drive was designed around metric pulleys, the SPZ profile is usually the correct family to look at.
The key dimensions to check are the profile and the length. This belt is SPZ, 862 mm long, 9.7 mm across the top, 8 mm high, with a 40 degree angle. Read the marking on the back of the old belt and compare it against these figures before ordering. If the drive runs more than one belt, replace the full set at the same time so the load stays evenly shared across the grooves.
Dimensions
- Section
- SPZ
- Length
- 862mm
Frequently asked questions
- How do I confirm this SPZ 862 belt fits my drive?
- Check the marking on the back of the belt you are removing. It should show the SPZ profile and an 862 mm length. Also confirm the pulley grooves are cut for an SPZ section, since a classical profile belt will not seat correctly in the same grooves.
- What are the dimensions of this belt?
- Profile SPZ, length 862 mm, top width 9.7 mm, height 8 mm, angle 40 degrees.
- Can you help if I am not sure this is the right belt?
- Send us the part number, the marking on the old belt, and a photo of the drive and pulleys by WhatsApp or email. We will confirm the profile and length or point you to the closest match we carry.