V-belt Optibelt SPZ 587
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- SK metric profile V-belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT SPZ 587 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 587 and any equivalents.
This Optibelt SPZ 587 belt is a narrow wedge V-belt from the SK metric profile series. It measures 587 mm in length, with a 9.7 mm top width, 8 mm height and a 40-degree angle. Use it where a compact, high-capacity metric drive calls for an SPZ cross-section.
Narrow wedge belts like this SPZ profile are common on industrial drives where space is tight and the pulley grooves are cut to metric dimensions. The 587 mm length and 9.7 mm top width identify the belt; the 40-degree angle matches standard SPZ groove geometry. Confirm fit by reading the marking on the old belt and comparing the profile and length, then checking the pulley groove width and condition.
If you are replacing a worn belt, send us the part number from the back of the belt or the drive details. We carry the Optibelt SPZ 587 and can help confirm it is the right belt for your application. For drives using multiple belts, inspect all sheaves and replace the set together so the load stays evenly distributed.
Dimensions
- Section
- SPZ
- Length
- 587mm
Frequently asked questions
- How do I confirm that the Optibelt SPZ 587 fits my drive?
- Check the marking on your existing belt for the SPZ profile and 587 mm length. Also verify the pulley groove is cut for an SPZ cross-section and is not worn. If you are unsure, send us the belt marking or drive details and we can help confirm the right belt.
- What does the SPZ profile mean for my application?
- SPZ is a metric narrow wedge profile. This belt has a 9.7 mm top width, 8 mm height and 40-degree angle. It is used on drives designed for SPZ cross-section belts, where a compact profile is needed.
- Can I replace just one belt in a multi-belt drive?
- For drives that use more than one belt, it is good practice to replace the full set at the same time. Mixing a new belt with worn belts can cause uneven loading. Inspect the sheaves for wear as well.