V-belt Optibelt SPZ 562
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- SK metric profile V-belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT SPZ 562 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 562 and any equivalents.
The Optibelt SPZ 562 is a narrow wedge V-belt in the SK metric profile series. It has an SPZ profile, a length of 562 mm, a top width of 9.7 mm, a height of 8 mm, and a 40° angle. This page is for maintenance and purchasing staff who need to match it to the belt being replaced.
To confirm the match, read the marking on the back of the old belt. You are looking for the profile and the length: SPZ and 562 mm. Then check the belt's dimensions against the data here: top width 9.7 mm, height 8 mm, and a 40° angle. If those agree, the Optibelt SPZ 562 is the correct profile and length.
A narrow wedge V-belt like this SPZ 562 is selected by profile and length, not by the equipment it came from. The SPZ profile and 562 mm length are the two values that must match. If the old belt is worn, stretched, or its marking is unreadable, measure the top width and height and compare them with 9.7 mm and 8 mm.
Send the part number SPZ 562, or the profile and length from the old belt, by WhatsApp or email. The team can confirm the right belt or suggest an equivalent. If you are replacing more than one belt on the same drive, include the quantity and the position of each belt so the set can be checked.
Dimensions
- Section
- SPZ
- Length
- 562mm
Frequently asked questions
- How do I match the Optibelt SPZ 562 to the belt I am replacing?
- Read the marking on the back of the old belt. Confirm the profile is SPZ and the length is 562 mm. Then check the top width of 9.7 mm, the height of 8 mm, and the 40° angle against the old belt.
- What should I send to request a quote for this belt?
- Send the part number SPZ 562, or the profile and length from the old belt, by WhatsApp or email. If you need more than one, include the quantity and the drive position for each belt.
- What are the dimensions of the Optibelt SPZ 562?
- It is an SPZ profile narrow wedge V-belt with a length of 562 mm, a top width of 9.7 mm, a height of 8 mm, and a 40° angle.