V-belt Optibelt SPZ 1700
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- SK metric profile V-belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
MITSUBOSHI and OPTIBELT: matching part numbers →GATES and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT SPZ 1700 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 1700 and any equivalents.
This Optibelt SPZ 1700 belt is a narrow wedge V-belt in the SK metric profile series. It measures 1700 mm in length, with a 9.7 mm top width, 8 mm height, and a 40° angle. Use these dimensions to match it against the belt you are replacing.
When matching an existing drive, read the marking on the back of the old belt first. Confirm the profile is SPZ and the length is 1700 mm, then check the top width and height against the 9.7 mm and 8 mm listed here. The 40° angle is part of the profile geometry and should correspond to the pulley groove.
If the old belt is worn or the marking is unreadable, measure the outside length and compare it to the 1700 mm figure. The same size is also listed under Mitsuboshi SPZ 1700 and Gates SPZ 1700, so you can reference those part numbers when checking against other belts on the drive.
For a quote, send the part number Optibelt SPZ 1700 or the full dimensions by WhatsApp or email. Our team can confirm the right belt or suggest an equivalent based on the profile and length you provide.
Dimensions
- Section
- SPZ
- Length
- 1700mm
Frequently asked questions
- How do I confirm this is the correct replacement belt?
- Check the marking on the old belt for SPZ and 1700 mm. Verify the top width is 9.7 mm and the height is 8 mm. The 40° angle is standard for this profile.
- What if the old belt marking is worn off?
- Measure the outside length and compare it to 1700 mm. Also measure the top width and height to confirm the SPZ profile. You can also reference the same size listed under Mitsuboshi SPZ 1700 and Gates SPZ 1700.
- What information should I send for a quote?
- Send the part number Optibelt SPZ 1700, or provide the profile, length, top width, and height. Our team will confirm the belt or suggest an equivalent.