V-belt Mitsuboshi SPZ 1700
- Brand
- MITSUBOSHI
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
MITSUBOSHI and OPTIBELT: matching part numbers →GATES and MITSUBOSHI: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MITSUBOSHI SPZ 1700 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 1700 and any equivalents.
This Mitsuboshi SPZ 1700 is a narrow wedge V-belt with an SPZ profile. It measures 9.7 mm across the top, 8 mm in height, and has a 40° angle. Use the marking on the old belt to match profile and length before ordering.
To match it to the belt being replaced, read the back of the old belt. Confirm the profile is SPZ and the length is 1700. Check the top width and height against 9.7 mm and 8 mm, and the angle against 40°. If the old belt is worn or the marking is unreadable, measure the top width and height with a caliper and compare to these values.
The same size is also listed under Optibelt SPZ 1700 and Gates SPZ 1700. If you find one of those markings on the old belt, this Mitsuboshi belt is the same size. For a quote, send the part number SPZ 1700, the quantity, and the application details. Our team can confirm the profile and length from your marking or measurements.
Inspect the drive before installing a new belt. Check sheave grooves for wear and alignment, and confirm the belt sits correctly in the groove. Replace belts in sets when the drive uses multiple belts, and keep the sheaves clean and free of debris.
Dimensions
- Section
- SPZ
Frequently asked questions
- How do I confirm this SPZ 1700 belt matches the one I am replacing?
- Read the marking on the back of the old belt. It should show SPZ and 1700. You can also measure the top width (9.7 mm), height (8 mm), and angle (40°) and compare to this belt.
- What should I send to request a quote for this belt?
- Send the part number SPZ 1700, the quantity you need, and any details from the old belt or drive. If you have the old belt, include a photo of the marking.
- Is this belt the same size as other brands?
- The same size is also listed under Optibelt SPZ 1700 and Gates SPZ 1700. If your old belt carries one of those markings, this Mitsuboshi belt is the same size.