V-belt Optibelt SPZ 1662 RP
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- Red Power 3 S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT SPZ 1662 RP belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 1662 RP and any equivalents.
When a drive needs a replacement belt, the first step is to read the marking on the old belt. This Optibelt SPZ 1662 RP is a narrow wedge V-belt from the Red Power 3 S=C Plus series. It has an SPZ profile, a 1662 mm length, a 9.7 mm top width, an 8 mm height, and a 40 degree angle.
The marking on the back of the belt identifies the profile and the length. SPZ is the profile, and 1662 is the length in millimeters. Match those two values to the belt you are replacing. The top width is 9.7 mm, the height is 8 mm, and the angle is 40 degrees. If the old belt is worn or the marking is hard to read, measure the length and compare the profile against the pulley groove.
This belt is part of the Optibelt Red Power 3 S=C Plus series. We carry it for maintenance, engineering, and purchasing teams. To request a quote, send the part number SPZ 1662 RP, the quantity, and the application details by WhatsApp or email. If you need to confirm the right belt or an equivalent, include a photo of the old belt marking and the pulley dimensions.
Dimensions
- Section
- SPZ
- Length
- 1662mm
Frequently asked questions
- How do I confirm this is the correct belt?
- Read the marking on the old belt. The profile is SPZ and the length is 1662 mm. Check that the top width is 9.7 mm, the height is 8 mm, and the angle is 40 degrees.
- What information should I send for a quote?
- Send the part number SPZ 1662 RP, the quantity you need, and the application details. A photo of the old belt marking and the pulley dimensions help confirm the correct belt.
- What should I do if the old belt marking is unreadable?
- Measure the belt length and compare the profile to the pulley groove. The SPZ profile has a 9.7 mm top width and an 8 mm height. Send those measurements and we can help confirm the right belt.