V-belt Optibelt SPZ 1662
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- SK metric profile V-belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and OPTIBELT: matching part numbers →MITSUBOSHI and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT SPZ 1662 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 1662 and any equivalents.
The Optibelt SPZ 1662 is a narrow wedge V-belt in the SK metric profile series. Its SPZ profile and 1662 mm length are the two dimensions you need to match or replace a belt on a metric drive. This page gives you the exact figures to compare against the belt you are removing.
The SPZ profile is a metric narrow wedge section. This belt measures 9.7 mm across the top, 8 mm in height and has a 40° angle. The 1662 mm length is the datum you check first when the old belt is worn or the marking has rubbed off. Write down the profile and length from the back of the belt, then compare them with these values.
The same size is also listed under Mitsuboshi SPZ 1662, so that reference can help you confirm what you need. If your drive uses more than one belt, order the full set at the same time so every belt in the drive matches in profile, length and construction.
To request a quote, send the part number Optibelt SPZ 1662 by WhatsApp or email. If you are unsure whether this is the correct belt for your drive, include the profile and length from the old belt, or a photo of the marking on its back. The team can confirm the right belt or suggest an equivalent.
Dimensions
- Section
- SPZ
- Length
- 1662mm
Frequently asked questions
- What do the SPZ profile and 1662 mm length mean for my drive?
- SPZ is the metric narrow wedge profile and 1662 mm is the length. Both must match the belt you are replacing. The top width is 9.7 mm, the height is 8 mm and the angle is 40°.
- How do I confirm this is the right belt before I order?
- Read the marking on the back of the old belt and compare the profile and length with SPZ and 1662 mm. If the marking is gone, measure the top width and height and check the length against the drive.
- Can I order this belt for a drive that uses several belts?
- Yes. Send the part number Optibelt SPZ 1662 by WhatsApp or email and state how many belts the drive uses, so the full set can be quoted together.