V-belt Optibelt SPZ 1600 RP
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- Red Power 3 S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT SPZ 1600 RP belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 1600 RP and any equivalents.
This Optibelt SPZ 1600 RP belt is a narrow wedge V-belt from the Red Power 3 S=C Plus series. It is used in industrial drives where a compact, high-capacity V-belt is required. Confirm fit by matching the profile, length and cross-section to your existing belt.
The SPZ profile is a narrow wedge section, so it fits pulleys designed for SPZ belts. This belt has a 1600 mm length, a 9.7 mm top width, an 8 mm height and a 40° angle. These dimensions are the key fit points: if your drive uses an SPZ pulley and the current belt is marked 1600, this belt matches that size.
To confirm the right belt, read the marking on the back of the old belt. Look for the profile (SPZ) and the length (1600). Also check the belt cross-section against the pulley groove: a narrow wedge belt sits in a matching SPZ groove. If the old belt is worn or the marking is unreadable, measure the top width and height and compare them to the values above.
When replacing a belt, inspect the drive for worn pulleys, misalignment or damaged grooves. Replacing belts in sets on multi-belt drives helps maintain even load sharing. If you need help confirming this Optibelt SPZ 1600 RP or a similar size, send the part number and a photo of the old belt marking by WhatsApp or email for a quote.
Dimensions
- Section
- SPZ
- Length
- 1600mm
Frequently asked questions
- What does the SPZ profile mean for fit?
- SPZ is a narrow wedge V-belt profile. It must be used with pulleys cut for SPZ belts. The top width is 9.7 mm, the height is 8 mm and the angle is 40°.
- How do I confirm the length of this belt?
- Check the marking on the back of your old belt for 1600. This belt has a length of 1600 mm. If the marking is not clear, measure the outside length and compare it to 1600 mm.
- What information should I send for a quote?
- Send the part number Optibelt SPZ 1600 RP, or the profile and length from your old belt. A photo of the back marking helps us confirm the correct belt.