V-belt Optibelt SPZ 1600
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- SK metric profile V-belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
OPTIBELT and STARK: matching part numbers →GATES and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT SPZ 1600 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 1600 and any equivalents.
The Optibelt SPZ 1600 is a narrow wedge V-belt in the SK metric profile series. Before you fit this belt, check the drive and sheaves so the new belt seats and runs correctly.
Inspect the sheave grooves for wear, corrosion, or embedded debris. Worn grooves let the belt sit too deep, which reduces grip and can cause slippage or heat. Confirm the grooves match the SPZ profile and that the sheaves are aligned so the belt runs straight without edge contact.
Check the condition of the drive: look for worn bearings, bent shafts, or loose mountings that could affect belt tracking. Clean the grooves and remove any burrs or sharp edges that could damage the belt. With a 1600 mm length, 9.7 mm top width, 8 mm height, and 40° angle, the Optibelt SPZ 1600 is a narrow wedge V-belt built for metric drives.
When you request a quote, send the part number and confirm the profile and length from the old belt. The same size is also listed under Stark SPZ 1600 and Gates SPZ 1600. Our team can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- SPZ
- Length
- 1600mm
Frequently asked questions
- What should I check on the drive before installing an Optibelt SPZ 1600?
- Inspect sheave grooves for wear, corrosion, and debris, and verify alignment. Check bearings, shafts, and mountings for conditions that could affect belt tracking. Clean grooves and remove sharp edges before fitting the belt.
- What are the dimensions of the Optibelt SPZ 1600?
- The belt has a 1600 mm length, 9.7 mm top width, 8 mm height, and a 40° angle. It is a narrow wedge V-belt in the SPZ profile.
- How do I request a quote for the Optibelt SPZ 1600?
- Send the part number Optibelt SPZ 1600 by WhatsApp or email. Confirm the profile and length from the old belt. Our team replies promptly and can help confirm the right belt or suggest an equivalent.