V-belt Optibelt SPZ 1462 RP
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- Red Power 3 S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT SPZ 1462 RP belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 1462 RP and any equivalents.
This Optibelt Red Power 3 S=C Plus belt is a narrow wedge V-belt in the SPZ profile with a 1462 mm length. The profile and length are the two numbers to match against your drive before you order.
The SPZ profile sets the cross-section: 9.7 mm top width, 8 mm height and a 40° angle. That section must match the pulley groove, so check the old belt or the drive documentation for SPZ before substituting anything else. The 1462 mm length is the datum you compare against the belt you are replacing; a different length will not tension correctly on the same drive.
The Red Power 3 S=C Plus construction is a narrow wedge V-belt intended for drives where this profile is specified. If the marking on the back of the old belt reads SPZ 1462, this is the size to quote. If the marking is worn or unreadable, measure the outside length and confirm the profile from the pulley groove.
We carry this belt and quote by part number. Send the code SPZ 1462 RP, or the marking from your existing belt, by WhatsApp or email and the team will confirm the belt or suggest an equivalent.
Dimensions
- Section
- SPZ
- Length
- 1462mm
Frequently asked questions
- What do the profile and length mean on this belt?
- SPZ is the narrow wedge profile, with a 9.7 mm top width, 8 mm height and 40° angle. The 1462 mm is the belt length. Both must match the drive.
- How do I confirm this is the right belt for my drive?
- Read the marking on the back of the old belt. If it shows SPZ 1462, this is the size. If it is unreadable, check the pulley groove profile and measure the length.
- How do I request a quote?
- Send the part number SPZ 1462 RP by WhatsApp or email. The team replies promptly and can confirm the belt or suggest an equivalent.