V-belt Optibelt SPZ 1450
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- SK S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT SPZ 1450 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 1450 and any equivalents.
This Optibelt SPZ 1450 belt is a narrow wedge V-belt from the SK S=C Plus series. It has a 9.7 mm top width, 8 mm height, 40° angle, and a 1450 mm length. If you are replacing a belt, use these dimensions to match the one being removed.
Matching a replacement starts with the belt you are taking off. Read the marking on the back: it should show the profile and length. For this Optibelt belt, the profile is SPZ and the length is 1450 mm. Check the top width and height as well: 9.7 mm and 8 mm. The 40° angle is another point to compare if you can measure it.
A narrow wedge V-belt like this one is often used where space is limited and a compact drive is needed. When you request a quote, send the part number SPZ 1450 and the brand Optibelt. If the old belt is worn or the marking is unreadable, measure the outside length and the cross-section so we can confirm the right belt or suggest an equivalent.
For drives with multiple belts, replace the full set at the same time. Mixing a new belt with worn ones can cause uneven tension and vibration. Inspect the sheaves for wear, alignment, and debris before installing the new belt. After installation, check tension according to the drive manufacturer's instructions and recheck after the first run-in period.
Dimensions
- Section
- SPZ
- Length
- 1450mm
Frequently asked questions
- How do I confirm that this Optibelt SPZ 1450 is the correct replacement?
- Compare the marking on your old belt with the profile SPZ and length 1450 mm. Also check the top width (9.7 mm), height (8 mm), and angle (40°). If the old belt is not readable, measure it and send those dimensions with your quote request.
- Can I replace just one belt on a multi-belt drive?
- It is best practice to replace all belts in a set at the same time. A new belt mixed with worn belts can lead to uneven load sharing, vibration, and shorter service life.
- What information should I include when requesting a quote?
- Send the part number SPZ 1450 and the brand Optibelt. If you are not sure, include the old belt's marking or its measured profile, top width, height, and length so we can help confirm the right belt or suggest an equivalent.