V-belt Optibelt SPZ 1262
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- SK metric profile V-belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
MITSUBOSHI and OPTIBELT: matching part numbers →GATES and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT SPZ 1262 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 1262 and any equivalents.
When a drive belt needs replacing, the marking on the back of the old belt is the most reliable starting point. This page covers the Optibelt SPZ 1262, a narrow wedge V-belt in the SK metric profile series. Use the profile and length below to confirm it matches the belt you are removing.
The Optibelt SPZ 1262 is a narrow wedge V-belt with an SPZ profile and a length of 1262 mm. Its top width is 9.7 mm, its height is 8 mm, and its included angle is 40 degrees. These dimensions identify the belt independently of any catalog listing or application note.
Before ordering, read the marking printed on the back of the belt currently installed. Confirm the profile (SPZ) and the length (1262 mm) against this page. The same size is also listed under Mitsuboshi SPZ 1262 and Gates SPZ 1262, so those markings may appear on a belt already in service.
If the old belt is worn, oiled, or the marking is no longer legible, measure the outside length and cross-section instead. Send the part number, the profile and length you read, and any photos of the belt and drive to our team by WhatsApp or email. We carry the Optibelt SPZ 1262 and can help confirm it is the right belt for your drive.
Dimensions
- Section
- SPZ
- Length
- 1262mm
Frequently asked questions
- How do I confirm this is the correct belt for my drive?
- Read the marking on the back of the belt you are replacing. If it shows SPZ and 1262, this Optibelt belt matches. If the marking is unreadable, measure the top width, height and length and send those values to our team.
- What should I send to request a quote?
- Send the part number Optibelt SPZ 1262, or the profile and length you read from the old belt. Photos of the belt marking and the drive help us confirm the match before you order.
- Is this belt listed under other brands?
- Yes. The same size is also listed under Mitsuboshi SPZ 1262 and Gates SPZ 1262. If your old belt carries one of those markings, this Optibelt belt is the same size.