V-belt Optibelt SPZ 1250
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- SK metric profile V-belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT SPZ 1250 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 1250 and any equivalents.
The Optibelt SPZ 1250 is a narrow wedge V-belt in the SK metric profile series. To match it to the belt being replaced, confirm the profile and length on the old belt and compare them with the SPZ profile and 1250 mm length listed here.
Start by reading the marking on the back of the belt you are replacing. You are looking for the profile and the length: this belt is SPZ, 1250 mm. Its top width is 9.7 mm, its height is 8 mm, and its angle is 40 degrees. If the old belt carries the same profile and length, this is the correct size to specify.
If the marking is worn or missing, measure the top width and the outside length of the old belt and compare those figures with the dimensions above. The profile controls how the belt sits in the pulley groove; the length controls how it fits the drive. Both must match before you order.
When you request a quote, send the part number SPZ 1250 and, if you have it, the marking from the old belt. We carry the Optibelt SPZ 1250 and can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- SPZ
- Length
- 1250mm
Frequently asked questions
- How do I confirm this is the belt I need?
- Compare the profile and length on your old belt with SPZ and 1250 mm. Also check the top width of 9.7 mm, height of 8 mm, and 40-degree angle against the belt being replaced.
- What should I send for a quote?
- Send the part number SPZ 1250. If you have the old belt, include the marking on its back or its measured top width and length so we can confirm the match.
- Can you help if the marking is unreadable?
- Yes. Send the part number SPZ 1250 and any measurements you can take from the old belt. We carry this Optibelt belt and can help confirm the right belt or suggest an equivalent.