V-belt Optibelt SPC KB 6700 BP
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Series
- KB Blue Power
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT SPC KB 6700 BP belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPC KB 6700 BP and any equivalents.
The Optibelt SPC KB 6700 BP is a banded V-belt in the KB Blue Power series, with a length of 6700 mm. It is designed for drives that use multiple V-belts running as a set, keeping them tied together to reduce vibration and prevent flipping.
Before fitting this belt, inspect the drive and sheaves. Check for worn grooves, misalignment, or damaged sheaves that can shorten belt life. Clean the grooves and verify that all sheaves are in good condition. A banded V-belt like the SPC KB 6700 BP should sit evenly in the grooves without bottoming out.
Proper tension is critical. Too little tension can cause slippage and heat; too much can damage bearings and the belt. Use a tension gauge and follow the drive manufacturer's recommendations. Because this is a banded belt, it must be replaced as a complete unit—never replace individual ribs or belts within the band.
When ordering, provide the part number SPC KB 6700 BP and the quantity needed. If you are unsure whether this is the correct belt for your drive, send the old belt's markings and photos of the sheaves. Our team can help confirm the right belt or suggest an equivalent.
Dimensions
- Length
- 6700mm
Frequently asked questions
- What is the length of the Optibelt SPC KB 6700 BP?
- The belt has a length of 6700 mm.
- Can I replace just one belt in a banded set?
- No. Banded V-belts are designed to be replaced as a complete set. Replacing only part of the band can lead to uneven tension and premature failure.
- What should I check before installing a new banded V-belt?
- Inspect the sheaves for wear, misalignment, and damage. Clean the grooves and ensure they are free of debris. Also check that the drive is properly aligned and that all components are in good working order.