V-belt Optibelt SPC 6700 BP2
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPC
- Series
- Blue Power 2
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT SPC 6700 BP2 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPC 6700 BP2 and any equivalents.
The Optibelt SPC 6700 BP2 is a narrow wedge V-belt from the Blue Power 2 series, profile SPC with a 6700 mm length. Before you fit it, take the time to inspect the drive and the sheaves it runs on.
A new belt on worn or damaged sheaves will not last. Check the groove flanks for wear, scoring and embedded debris, and confirm the sheaves are aligned and free of runout. Look at the rest of the drive as well: worn bearings, a bent shaft or a weak tensioner will shorten belt life no matter how good the replacement is.
Once the drive checks out, confirm the marking on the old belt matches what you are ordering. This belt is identified by profile SPC and a 6700 mm length, so that is what to compare against the belt you are removing. If the drive runs more than one belt, replace the full set at the same time rather than mixing a new belt with used ones.
Send the part number SPC 6700 BP2 and the quantity you need by WhatsApp or email, and our team will come back to you with a quote. If you are unsure whether this is the right belt for the drive, include the profile and length from the old belt and we will confirm it.
Dimensions
- Section
- SPC
- Length
- 6700mm
Frequently asked questions
- What should I inspect before installing this belt?
- Check the sheave grooves for wear, scoring and debris, verify alignment and runout, and look over the bearings, shaft and tensioner. Correcting drive problems first protects the new belt.
- How do I confirm this is the correct belt?
- Compare the profile and length marked on the belt you are removing. This belt is profile SPC with a 6700 mm length. If the marking is unclear, send us what you can read and we will help.
- Should I replace all the belts on a multi-belt drive?
- Yes. On a drive running more than one belt, fit a complete set so the belts share the load evenly instead of mixing new and used belts.