V-belt Optibelt SPC 6700
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPC
- Series
- SK metric profile V-belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT SPC 6700 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPC 6700 and any equivalents.
The Optibelt SPC 6700 is a narrow wedge V-belt in the SK metric profile series, built to the SPC profile with a 6700 mm length. If you are replacing a belt on a metric drive, this is the number to match against the belt you are pulling off.
Matching starts at the belt itself. Read the marking printed on the back of the old belt and compare it to the profile and length on this page: SPC profile, 6700 mm. Profile and length are what identify the belt in a metric drive, so those two values need to line up before anything else. If the marking is worn off or unreadable, measure the old belt and check the drive documentation for the profile it takes.
The SPC profile is a narrow wedge section, so it runs in the same groove range as other SPC belts of the same length. When the drive carries more than one belt, inspect the whole set rather than only the failed belt, and check sheave grooves for wear while the drive is open. A worn groove can shorten belt life regardless of the belt you install.
We carry the Optibelt SPC 6700 and quote by part number. Send the part number, the quantity, and a photo of the old belt marking if you have one, by WhatsApp or email, and the team will confirm the belt or suggest an equivalent.
Dimensions
- Section
- SPC
- Length
- 6700mm
Frequently asked questions
- How do I confirm the Optibelt SPC 6700 is the belt I need?
- Check the marking on the back of the belt being replaced. It should show the SPC profile and a 6700 mm length. If it does, this is the matching belt.
- What should I send to get a quote?
- Send the part number SPC 6700, the quantity you need, and a photo of the old belt marking if it is still readable. We reply by WhatsApp or email.
- The marking on my old belt is gone. What then?
- Measure the old belt and check the drive documentation for the profile it takes. Send those details and the team will help confirm the right belt or suggest an equivalent.