V-belt Optibelt SPB 3550 BP2
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPB
- Series
- Blue Power 2
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT SPB 3550 BP2 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPB 3550 BP2 and any equivalents.
When you need to replace a narrow wedge V-belt, the marking on the old belt is your best starting point. This page covers the Optibelt SPB 3550 BP2 from the Blue Power 2 series. Confirm the profile and length, then send us the part number for a quote.
The Optibelt SPB 3550 BP2 is a narrow wedge V-belt with an SPB profile and a length of 3550 mm. It has a top width of 16.3 mm, a height of 13 mm, and a 40-degree angle. These dimensions match the marking you will find on the back of the belt you are replacing.
To read the marking, look for the profile (SPB) and the length (3550). The part number SPB 3550 BP2 also identifies the Blue Power 2 series. If the old belt is worn or the marking is hard to read, measure the top width and the outside length to confirm the profile and length before ordering.
We supply this belt to maintenance, engineering, and purchasing teams across the United States, Canada, Mexico, and South America. To request a quote, send the part number SPB 3550 BP2 by WhatsApp or email. If you need help confirming the right belt or a possible equivalent, our team can assist.
Dimensions
- Section
- SPB
- Length
- 3550mm
Frequently asked questions
- What does the marking on the back of the belt tell me?
- The marking shows the profile and the length. For this belt, you will see SPB and 3550, which correspond to the SPB profile and 3550 mm length. The part number SPB 3550 BP2 also identifies the Blue Power 2 series.
- How do I confirm this is the correct belt for my drive?
- Check the old belt's marking for the profile and length. This belt has an SPB profile and a 3550 mm length. You can also measure the top width (16.3 mm) and height (13 mm) to verify the cross-section.
- What information should I send to request a quote?
- Send the part number SPB 3550 BP2 by WhatsApp or email. If you have the old belt, include a photo of the marking or the measured dimensions. Our team will reply promptly to confirm the belt or suggest an equivalent.