V-belt Optibelt SPB 2500 RP
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPB
- Series
- Red Power 3 S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT SPB 2500 RP belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPB 2500 RP and any equivalents.
The Optibelt SPB 2500 RP is a narrow wedge V-belt from the Red Power 3 S=C Plus series. Its SPB profile and 2500 mm length identify the drive position it fits, so the part number alone is often enough to match an existing belt.
The SPB profile is the selection starting point. This belt has a 16.3 mm top width, 13 mm height and a 40-degree angle, dimensions that determine how it seats in the pulley groove. The 2500 mm length then sets the center distance on the drive. Check both against the old belt's marking before ordering.
The Red Power 3 S=C Plus series is built for drives that run continuously. When replacing a belt on a multi-belt drive, fit a full set of the same profile and length so the load stays evenly shared across the grooves.
To request a quote, send the part number SPB 2500 RP, the quantity, and the belt marking from the drive. If the marking is worn, a photo of the belt and pulley arrangement helps confirm the correct profile and length.
Dimensions
- Section
- SPB
- Length
- 2500mm
Frequently asked questions
- What does the SPB profile mean for fit?
- SPB is a narrow wedge profile with a 16.3 mm top width, 13 mm height and 40-degree angle. It must match the pulley groove profile for the belt to seat and transmit load correctly.
- How do I confirm the 2500 mm length is right?
- Compare it with the length marked on the belt you are replacing. If the old belt is worn or unmarked, measure the drive or send a photo and our team can help confirm the correct length.
- Can you help if I only have the old belt number?
- Yes. Send the part number from the old belt, or a clear photo of the belt and the drive, and we will confirm the Optibelt SPB 2500 RP or suggest an equivalent.