V-belt Optibelt C 47
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- VB
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and OPTIBELT: matching part numbers →MITSUBOSHI and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT C 47 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for C 47 and any equivalents.
The Optibelt C 47 is a classical V-belt in profile C with a length of 1295 mm. This page covers what to check on the drive and sheaves before fitting a new belt. Send the part number for a quote.
Before fitting a C 47, inspect the sheave grooves for wear, rust, or embedded debris. Worn grooves let the belt sit too deep, so it slips and wears fast. Check sheave alignment with a straightedge or laser; misalignment shortens belt life. Confirm the new belt matches the old one: profile C, 1295 mm length, 22 mm top width, 14 mm height, 40 degree angle.
Spin the sheaves by hand to feel for rough bearings or wobble. Check the drive for oil, heat, or obstructions that could damage the belt. If the drive uses multiple belts, replace them as a set so lengths match and load stays even. The same size is also listed under Mitsuboshi C 47.
For a quote, send the part number C 47 and the quantity you need. If you are unsure, send a photo of the belt marking and sheave dimensions. We carry Optibelt and can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- C
- Length
- 1295mm
Frequently asked questions
- What should I check on the drive before installing this belt?
- Inspect sheave grooves for wear or debris, verify alignment, and check bearings for roughness. Correct any issues before fitting the belt.
- How do I confirm this is the right belt?
- Compare the marking on your old belt: profile C, 1295 mm length. Also check the top width (22 mm) and height (14 mm) if you can measure them.
- How do I request a quote?
- Send the part number C 47 and the quantity you need by WhatsApp or email. We reply promptly and can help confirm the right belt.