V-belt Mitsuboshi C 47
- Brand
- MITSUBOSHI
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and MITSUBOSHI: matching part numbers →MITSUBOSHI and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MITSUBOSHI C 47 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for C 47 and any equivalents.
The Mitsuboshi C 47 is a classical V-belt in profile C. The C profile gives you a 22 mm top width, a 14 mm height, and a 40° angle, so you can match it directly to the sheave groove on the drive you are replacing.
The profile and the 40° angle are what determine fit in the pulley groove. Measure the old belt across the top and across the side, and compare those two numbers with the 22 mm and 14 mm shown here. If both match and the belt is marked C 47, this is the size to quote.
The same size is also listed under Optibelt C 47, so if that is what is on the shelf or on the machine, the size is the same. Send the part number from the back of the old belt, along with the profile and length, and we can confirm the right belt or suggest an equivalent.
Dimensions
- Section
- C
Frequently asked questions
- What does the C in C 47 tell me?
- It is the profile. For this belt, profile C means a 22 mm top width, a 14 mm height, and a 40° angle. Check those against the sheave groove before ordering.
- How do I confirm this is the belt on my drive?
- Read the marking on the back of the old belt. If it shows C 47, the profile and length match. You can also measure the top width and height and compare them with 22 mm and 14 mm.
- What should I send to get a quote?
- Send the part number, C 47, and the belt marking or a photo of the back of the belt. If the marking is worn, send the profile and the measured length so we can confirm the size.