V-belt Optibelt C 117
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- VB
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and OPTIBELT: matching part numbers →OPTIBELT and STARK: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT C 117 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for C 117 and any equivalents.
The Optibelt C 117 is a classical V-belt in profile C with a 3073 mm length. It measures 22 mm across the top, 14 mm in height and has a 40-degree angle. Read the marking on the back of the old belt to confirm this part number before ordering.
When you pull the old belt off a drive, the marking on the back is the most direct way to identify what you need. Look for the part number, the profile and the length. On the Optibelt C 117, the profile is C and the length is 3073 mm. The belt is 22 mm wide at the top, 14 mm high and has a 40-degree angle. If the back of the belt is worn or dirty, clean it and read the characters again; matching all three details avoids a wrong fit.
This classical V-belt is also listed under the same size in Stark as C 117. If your drive uses more than one belt, replace the full set at the same time so the load stays even across the grooves. Inspect the sheaves for wear, rust or debris while the belt is off, and check that the belt sits correctly in the groove.
To request a quote, send the part number Optibelt C 117 by WhatsApp or email. If the marking is hard to read, send the profile and length from the old belt, and the team will confirm the right belt or suggest an equivalent.
Dimensions
- Section
- C
- Length
- 3073mm
Frequently asked questions
- How do I confirm the Optibelt C 117 is the right belt for my drive?
- Read the marking on the back of the old belt. It should show the part number, the profile C and the length 3073 mm. If the marking is unreadable, measure the top width, height and angle to compare with the 22 mm, 14 mm and 40-degree specifications.
- Can I use the Stark C 117 instead?
- The same size is also listed under Stark as C 117. If your drive requires a specific brand, confirm the part number on the old belt before ordering.
- What information should I send with my quote request?
- Send the part number Optibelt C 117, or the profile and length from the old belt. If you are replacing a set, include the number of belts on the drive.