V-belt Optibelt C 115
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- VB
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and OPTIBELT: matching part numbers →OPTIBELT and STARK: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT C 115 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for C 115 and any equivalents.
The Optibelt C 115 is a classical V-belt with a C profile and a length of 3023 mm. It is built to the standard C cross-section: 22 mm top width, 14 mm height and a 40-degree angle. This page covers how to match it to the belt you are replacing.
The most reliable way to identify a replacement is to read the marking on the back of the old belt. If it shows C 115, this belt matches that designation. Before ordering, confirm the profile is C and the length is 3023 mm, since a belt that looks similar on the drive can differ in cross-section or length.
If the old belt is worn or the marking is no longer legible, measure the top width, height and outside length and compare them with the values above. The same size is also listed under Stark C 115. Send the part number, the application and a photo of the old belt if you need help confirming the match.
Inspect the sheaves at the same time. Worn grooves or misaligned pulleys can shorten belt life even when the replacement is correct. When a drive uses multiple belts, replace the full set so the load stays evenly distributed.
Dimensions
- Section
- C
- Length
- 3023mm
Frequently asked questions
- How do I confirm the Optibelt C 115 fits my drive?
- Check the marking on the back of the belt you are replacing. If it reads C 115, this belt matches that designation. You can also measure the top width, height and outside length and compare them with the values on this page.
- What are the dimensions of this belt?
- It has a C profile with a 22 mm top width, a 14 mm height, a 40-degree angle and a length of 3023 mm.
- What should I send to request a quote?
- Send the part number C 115, the quantity you need and the drive application. A photo of the old belt and its marking helps confirm the correct replacement.