V-belt Optibelt BX 95
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- BX
- Series
- Super TX
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
OPTIBELT and STARK: matching part numbers →MITSUBOSHI and OPTIBELT: matching part numbers →DAYCO and OPTIBELT: matching part numbers →GATES and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT BX 95 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for BX 95 and any equivalents.
The Optibelt Super TX BX 95 is a cogged classical V-belt with a BX profile and a length of 2489 mm. Before you fit a replacement, inspect the drive and sheaves so the new belt runs true and wears evenly.
Check sheave grooves for wear, rust, or debris. Worn grooves can cause a new belt to sit too low or slip. Confirm the sheaves are aligned and the correct BX profile is used. Measure the existing belt or read the marking on its back to confirm BX 95 and 2489 mm.
The same size is also listed under Stark BX 95, Mitsuboshi BX 95, Dayco BX 95, and Gates BX 95. If you are replacing a belt on a drive with multiple belts, inspect all sheaves and consider replacing the full set so loads stay even.
To request a quote, send the part number BX 95, the profile BX, and the length 2489 mm by WhatsApp or email. Our team replies promptly and can help confirm the right belt for your drive.
Dimensions
- Section
- BX
- Length
- 2489mm
Frequently asked questions
- What should I check on the drive before fitting this belt?
- Inspect sheave grooves for wear, rust, or debris, and verify alignment. Confirm the sheaves accept a BX profile belt and that the drive is clean and free of obstructions.
- How do I confirm the belt size on the old belt?
- Look for the marking on the back of the belt. It should show the profile and size, such as BX 95. If the marking is worn, measure the outside length and compare to 2489 mm.
- What information do you need to quote this belt?
- Send the part number BX 95, the profile BX, and the length 2489 mm by WhatsApp or email. If you have photos of the old belt or the drive, include them to help us confirm.