V-belt Dayco BX 95
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- BX
- Series
- Classical raw-edged industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
DAYCO and STARK: matching part numbers →DAYCO and MITSUBOSHI: matching part numbers →DAYCO and OPTIBELT: matching part numbers →DAYCO and GATES: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO BX 95 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for BX 95 and any equivalents.
The Dayco BX 95 is a cogged classical V-belt with a BX profile and a length of 2489.2 mm. It belongs to the Dayco classical raw-edged industrial belt series. If you are replacing a worn belt, matching the profile and length on the old belt is the first step.
To match this belt to the one being replaced, read the marking on the back of the old belt. Confirm the profile is BX and the length is 2489.2 mm. If the old belt is unmarked or worn, measure its top width and outside length and compare those dimensions to the BX profile and 2489.2 mm length of this belt.
The same size is also listed under Stark BX 95, Mitsuboshi BX 95, Optibelt BX 95 and Gates BX 95. If your drive uses more than one belt, inspect all belts in the set and replace them together so the load is shared evenly. Check sheave grooves for wear and alignment before installing a new belt.
Send the part number BX 95, or the marking from your old belt, by WhatsApp or email to request a quote. If you are unsure whether this is the correct belt, include the drive details and the team can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- BX
- Length
- 2489.2mm
Frequently asked questions
- How do I confirm the Dayco BX 95 is the right belt for my drive?
- Check the marking on the back of the belt you are replacing. It should show the BX profile and a 2489.2 mm length. If the marking is unreadable, measure the old belt and compare it to the BX profile and 2489.2 mm length of this belt.
- Can I replace just one belt in a multi-belt drive?
- It is good practice to replace all belts in a set at the same time. Belts that have run together wear together, and mixing a new belt with used ones can cause uneven load sharing. Inspect the sheaves for wear and alignment as well.
- What information should I send to request a quote?
- Send the part number BX 95, or the full marking from your old belt, by WhatsApp or email. If you want help confirming the right belt or an equivalent, include the drive details and the team will reply promptly.