V-belt Optibelt BX 40
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- BX
- Series
- Super TX
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
OPTIBELT and STARK: matching part numbers →DAYCO and OPTIBELT: matching part numbers →GATES and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT BX 40 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for BX 40 and any equivalents.
The Optibelt Super TX BX 40 is a cogged classical V-belt in the BX profile with a length of 1092 mm. Cogged classical V-belts are commonly used on drives where a standard wrapped belt would run hot or slip, such as compact machinery, pumps, fans and light industrial equipment. The cogged underside improves flexibility around small pulleys.
To confirm fit, read the marking on the back of the old belt. You need the profile (BX) and the length (1092 mm). The part number BX 40 also identifies this belt. If the marking is worn, measure the outside length and the top width, and note the pulley diameters and the number of ribs or grooves in the drive.
The same size is also listed under Stark BX 40, Dayco BX 40 and Gates BX 40. We carry the Optibelt Super TX BX 40. When you request a quote, send the part number, the profile and the length, and a photo of the old belt marking if possible. That helps us confirm you receive the correct belt.
Inspect the drive before replacement. Check for worn pulleys, misalignment, oil or heat damage, and replace belts in sets when the drive uses more than one belt. A cogged classical V-belt like this one is suited to drives that need flexibility and heat resistance.
Dimensions
- Section
- BX
- Length
- 1092mm
Frequently asked questions
- How do I confirm the Optibelt Super TX BX 40 is the right belt for my drive?
- Check the marking on the back of the old belt for the profile BX and the length 1092 mm, and match the part number BX 40. If the marking is not readable, measure the outside length and top width, and note the pulley dimensions.
- What information should I send with my quote request?
- Send the part number BX 40, the profile BX, the length 1092 mm, and a photo of the old belt marking if you have one. If you are unsure, include the drive details such as pulley diameters and the number of belts used.
- Is the same size listed under other brands?
- Yes, the same size is also listed under Stark BX 40, Dayco BX 40 and Gates BX 40.