V-belt Dayco BX 40
- Brand
- DAYCO
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- BX
- Series
- Classical raw-edged industrial belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
DAYCO and STARK: matching part numbers →DAYCO and OPTIBELT: matching part numbers →DAYCO and GATES: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
DAYCO BX 40 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for BX 40 and any equivalents.
The Dayco BX 40 is a cogged classical V-belt in the BX profile with a length of 1092.2 mm. It belongs to Dayco's line of classical raw-edged industrial belts. The same size is also listed under Stark BX 40, Optibelt BX 40 and Gates BX 40.
When you read the marking on the back of an old belt, work from the profile and the length, not from the brand alone. The BX profile and the 1092.2 mm length are what identify this belt; the part number on the back is how you confirm it. If the marking is worn or unreadable, measure the belt and note the profile before you order.
The BX profile is a classical V-belt section, and the cogged construction is typical of raw-edged industrial belts used on drives where the belt bends over small pulleys. This belt is a single V-belt, not a banded set. If a drive runs more than one belt, check every belt on the drive and replace them as a set so the load stays even across the grooves.
Dimensions
- Section
- BX
- Length
- 1092.2mm
Frequently asked questions
- What does the marking on my old belt tell me?
- The marking gives the profile and the part number. Here that is BX and BX 40, which corresponds to a 1092.2 mm length. If the marking is gone, identify the profile from the pulley groove and measure the outside length.
- Is the Dayco BX 40 the same as other BX 40 belts?
- The same size is also listed under Stark BX 40, Optibelt BX 40 and Gates BX 40. Confirm the profile and the 1092.2 mm length against your drive before ordering.
- What should I send to get a quote?
- Send the part number, BX 40, along with the profile and length if you have them. If you are replacing an unmarked belt, send the pulley dimensions and the measured length so we can confirm the right belt.