V-belt Optibelt BCP 416
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Conveyor Power
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT BCP 416 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for BCP 416 and any equivalents.
The Optibelt BCP 416 is a classical V-belt in the B profile. Its 10643 mm length and 17 mm top width make it a specific fit for long-center drives. This page gives you the profile and length data you need to check against your existing belt.
When selecting a replacement, start with the profile and length. The B profile has a 17 mm top width, an 11 mm height and a 40° angle. The length is 10643 mm. These dimensions are the primary match points for any classical V-belt drive. If your current belt is marked BCP 416, this is the same profile and length.
Classical V-belts like this one are used in industrial drives where a standard cross-section is required. The B profile is a common cross-section for general power transmission. Because the length is fixed at 10643 mm, confirm the drive center distance and pulley grooves before ordering. A belt that is too short or too long will not tension correctly.
To request a quote, send the part number BCP 416, the profile B, and the length 10643 mm. If you are replacing a belt that is worn or unmarked, measure the top width and the outside length, or send a photo of the belt and the drive. We carry Optibelt belts and can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- B
- Length
- 10643mm
Frequently asked questions
- What are the dimensions of the Optibelt BCP 416?
- It is a classical V-belt with a B profile, a top width of 17 mm, a height of 11 mm, an angle of 40° and a length of 10643 mm.
- How do I confirm this is the correct belt for my drive?
- Check the marking on the back of your existing belt for BCP 416. If it is unreadable, measure the top width and the outside length, and compare them to 17 mm and 10643 mm.
- What information should I send for a quote?
- Send the part number BCP 416, the profile B, and the length 10643 mm. If you have the old belt, include a photo of the back marking and the drive pulleys.