V-belt Optibelt BCP 398
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Conveyor Power
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT BCP 398 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for BCP 398 and any equivalents.
The Optibelt BCP 398 is a classical V-belt in the Conveyor Power series, built for industrial drives that run a B profile. It measures 10185 mm in length, with a 17 mm top width, 11 mm height and a 40-degree angle. The most reliable way to select it is to match it directly to the belt you are replacing.
Start by reading the marking on the back of the old belt. Confirm the profile is B and the length is 10185 mm, then check the top width of 17 mm and the height of 11 mm against the worn belt. The 40-degree angle is part of the profile geometry, so a belt that has worn or stretched may no longer measure true even if the marking matches.
Inspect the drive before ordering. Look for uneven wear, cracks, glazing or a belt sitting low in the groove, and check that the pulleys are aligned and the grooves are clean. If the drive runs more than one belt, replace the full set so the load stays shared evenly across all belts.
When you request a quote, send the part number BCP 398 along with the belt marking and the drive details. Our team replies promptly and can help confirm the correct belt or suggest an equivalent.
Dimensions
- Section
- B
- Length
- 10185mm
Frequently asked questions
- How do I confirm the BCP 398 is the right belt for my drive?
- Read the marking on the belt being replaced and compare it with the profile, length, top width and height listed for the BCP 398. If the marking is worn off, measure the old belt and check the pulley grooves before ordering.
- What should I send with my quote request?
- Send the part number BCP 398, the marking on the old belt if it is readable, and any drive details you have. Our team replies promptly and can help confirm the right belt or suggest an equivalent.
- Should I replace all belts on the drive at once?
- On a multi-belt drive, replace the full set together. Mixing a new belt with worn belts can leave the new belt carrying more than its share of the load.