V-belt Optibelt B 79 KB
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- KB
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT B 79 KB belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for B 79 KB and any equivalents.
The Optibelt B 79 KB is a banded V-belt in the KB series with a length of 2083 mm. When you need to replace a belt on a multi-groove drive, the marking on the old belt is the most reliable starting point. We carry this belt and can help you confirm it matches your application.
On the back of a banded V-belt, you will typically find the part number, the series, and the length. For this Optibelt belt, the marking shows B 79 KB, which identifies it as a KB series banded V-belt with a length of 2083 mm. Banded V-belts are used where multiple V-belts run in parallel and must stay aligned, such as on drives that require synchronized power transmission without the risk of individual belts flipping or jumping off.
If the existing belt is worn or the marking is no longer legible, check the drive for other clues. Count the number of ribs or grooves on the pulleys, measure the pulley diameters if possible, and note the center distance between shafts. These details, along with the old belt's part number, will help our team confirm that the B 79 KB is the correct replacement.
To request a quote, send us the part number B 79 KB, the brand Optibelt, and any additional information you have about the drive. If you are unsure whether this is the right belt, our team can review your details and suggest an equivalent if one is listed.
Dimensions
- Length
- 2083mm
Frequently asked questions
- What should I do if the marking on my old belt is worn off?
- Look for any remaining characters on the back of the belt. If none are legible, note the drive's pulley configuration, the number of belts, and the center distance. Send these details along with the old belt's dimensions if you can measure them, and we will help identify the correct replacement.
- Can I replace just one belt in a banded set?
- Banded V-belts are designed to work as a unit, with multiple belts joined by a top cover. Replacing only one belt in a set is not recommended because the belts must operate together to maintain alignment and load distribution. We suggest replacing the entire banded belt.
- How do I request a quote for the Optibelt B 79 KB?
- Send the part number B 79 KB and the brand Optibelt via WhatsApp or email. If you have any drive details or a photo of the old belt's marking, include those as well. Our team will reply promptly with a quote or with any questions needed to confirm the correct belt.