V-belt Optibelt A 87
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- VB / Red Power
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
DODGE and OPTIBELT: matching part numbers →GATES and OPTIBELT: matching part numbers →MITSUBOSHI and OPTIBELT: matching part numbers →OPTIBELT and STARK: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT A 87 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for A 87 and any equivalents.
The Optibelt A 87 is a classical V-belt from the Red Power series, built for industrial drives that use an A profile. It measures 2261 mm in length, with a 13 mm top width, 8 mm height and a 40-degree angle. Confirm your drive's profile and length before ordering.
Classical V-belts like this A profile are common on older or standard industrial drives such as fans, pumps, compressors and line-shaft equipment. The A profile is a widely used cross-section, so checking the old belt's marking is the quickest way to match it. Look for the profile letter and the length number on the back of the belt, then compare them to the profile and length shown here.
If the marking is worn off, measure the top width and the outside length of the old belt and compare those to the 13 mm top width and 2261 mm length listed for this belt. Also check the pulley groove: a 40-degree angle and an 8 mm height are part of the fit. When a drive runs more than one belt, replace the full set at the same time so the load stays even across the grooves.
The same size is also listed under Mitsuboshi A 87 and Stark A 87, which gives you options when you are cross-referencing a drive. To request a quote, send the part number A 87, the brand Optibelt if you want this one, and the quantity you need. If you are unsure between this belt and another, include the old belt's marking or your measurements and our team can help confirm the right belt.
Dimensions
- Section
- A
- Length
- 2261mm
Frequently asked questions
- How do I confirm that the Optibelt A 87 fits my drive?
- Check the marking on the back of the old belt for the A profile and the 87 length number. If it is unreadable, measure the top width and outside length and compare them to the 13 mm top width and 2261 mm length listed here. Also confirm the pulley groove matches the 40-degree angle and 8 mm height.
- Can I use this belt if my drive takes more than one belt?
- Yes, but replace all belts on the drive at the same time. Mixing a new belt with worn ones can cause uneven loading across the grooves. Order the quantity you need for the full set.
- What do I send to get a quote for the Optibelt A 87?
- Send the part number A 87 and the quantity you need by WhatsApp or email. If you want this brand, include Optibelt. If you are comparing options, mention that the same size is also listed under Mitsuboshi A 87 and Stark A 87.