V-belt Optibelt A 85
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- A
- Series
- VB / Red Power
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
DODGE and OPTIBELT: matching part numbers →GATES and OPTIBELT: matching part numbers →OPTIBELT and STARK: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT A 85 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for A 85 and any equivalents.
The Optibelt A 85 is a classical V-belt in the VB / Red Power series. It has an A profile, a length of 2210 mm, a top width of 13 mm, a height of 8 mm, and a 40-degree angle. Read the marking on the back of your old belt to confirm the part number before requesting a quote.
If the old belt is worn or dirty, clean the back so the marking is readable. The Optibelt A 85 should show the brand, series, and code. Check that the profile is A and the length is 2210 mm. The top width is 13 mm, the height is 8 mm, and the angle is 40 degrees. These values match the data for this belt.
The same size is also listed under Stark A 85. If your drive uses more than one belt, replace all belts in the set at the same time. Mixing new and old belts can cause uneven load. Inspect the pulleys for wear, alignment, and debris. Confirm that the replacement belt matches the original profile and length.
To request a quote, send the part number A 85, the brand Optibelt, and the quantity. If the marking is unreadable, send a photo of the belt and the pulley dimensions. The team can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- A
- Length
- 2210mm
Frequently asked questions
- How do I verify the Optibelt A 85 before ordering?
- Read the marking on the back of the old belt. It should show Optibelt, VB / Red Power, and A 85. Confirm the profile is A and the length is 2210 mm.
- What should I send to request a quote for this belt?
- Send the part number A 85, the brand Optibelt, and the quantity you need. If the marking is unclear, include a photo of the belt and the pulley dimensions.
- Can I replace just one belt in a multi-belt drive?
- For drives with multiple belts, replace all belts in the set at the same time. This helps maintain even tension and load across the drive.