Timing belt Optibelt 920 D8MHP 30
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Omega HP
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 920 D8MHP 30 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 920 D8MHP 30 and any equivalents.
This Optibelt 920 D8MHP 30 is a double-sided timing belt from the Omega HP series. It is used in drives where both sides of the belt need to transmit motion, such as reversing or twin-shaft arrangements. To confirm fit, match the profile and the 920 mm length to the drive you are replacing.
A double-sided timing belt has teeth on both faces, so it can drive pulleys on either side. That makes it a common choice for reversing drives, opposed shafts, and compact layouts where one belt must turn two pulleys in opposite directions. The 920 mm length and the D8MHP profile are the two figures to check against your existing belt or drive drawing.
The most reliable way to confirm the replacement is to read the marking on the back of the old belt and compare it with this part number. If the old belt is worn or the marking is unreadable, measure the length and identify the tooth profile from the pulleys. Send the part number, the profile, and the 920 mm length to our team, and we will help you confirm the match or suggest an equivalent.
Timing belts should be inspected for cracked teeth, exposed cords, glazing, and edge wear. On double-sided belts, check both faces, since either side can show damage. If the drive uses more than one belt, replace them as a set so the load stays even.
Dimensions
- Length
- 920mm
Frequently asked questions
- What does the 920 mm length refer to on this belt?
- It is the belt length given for this Optibelt 920 D8MHP 30. Match it to the length called out for your drive, along with the D8MHP profile.
- How do I confirm this double-sided timing belt fits my drive?
- Read the marking on the back of the old belt and compare it with the part number. If that is not possible, check the profile against the pulleys and confirm the 920 mm length. Send those details to our team and we will help you verify the match.
- What should I check when inspecting a double-sided timing belt?
- Look for cracked or missing teeth, exposed cords, glazing, and edge wear on both faces. On multi-belt drives, replace the belts as a set.