Timing belt Optibelt 920 8M
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Omega High Power
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 920 8M belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 920 8M and any equivalents.
This Optibelt 920 8M belt is a timing belt from the Omega High Power series. It uses the HTD 8M profile with an 8 mm pitch and a 920 mm length. Timing belts like this one are used on industrial drives where the belt teeth engage matching pulleys to keep the driven shaft in step with the drive.
To confirm fit, read the marking on the back of the belt you are replacing. The part number should show 920 8M, and the profile should match HTD 8M. Check that the pulleys on the drive are cut for the same 8M pitch and that the belt width and tooth pattern match what the drive uses.
If the marking is worn or unreadable, measure the belt length in millimeters and check the pulley groove profile. A belt with the same 920 mm length and HTD 8M profile is the correct starting point. Send the part number, the belt marking, or a photo of the old belt and the pulleys to MR for a quote.
Inspect the pulleys and the rest of the drive before installing a new belt. Look for worn or damaged teeth, misalignment, and correct tension. Replace any worn components so the new Optibelt timing belt runs true and delivers the expected service life.
Dimensions
- Profile
- HTD 8M
- Pitch
- 8mm
- Length
- 920mm
Frequently asked questions
- How do I confirm that the Optibelt 920 8M is the right belt for my drive?
- Check the marking on the old belt for 920 8M and HTD 8M. Confirm that the pulleys are cut for an 8 mm pitch and that the belt width and tooth pattern match the drive. If the marking is not readable, measure the belt length and check the pulley profile.
- What information should I send to request a quote for this belt?
- Send the part number 920 8M, the brand Optibelt, and the profile HTD 8M. If you have the old belt, include the full marking from the back of the belt or a photo of the belt and the pulleys. MR will reply by WhatsApp or email.
- What should I check on the drive before replacing a timing belt?
- Inspect the pulleys for worn or damaged teeth, check that the pulleys are aligned, and verify the belt tension. Replacing worn components at the same time helps the new belt run correctly.