V-belt Optibelt 8V KB 1060 BP
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Series
- KB Blue Power
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 8V KB 1060 BP belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8V KB 1060 BP and any equivalents.
The Optibelt 8V KB 1060 BP is a banded V-belt from the KB Blue Power series. Its 8V profile and 2692 mm length are the two figures to check against your drive before you order.
The 8V profile sets the cross-section that must match your sheave grooves. The 1060 marking on the belt corresponds to the 2692 mm length given here, so confirm both the profile and the length against the belt you are replacing. A banded V-belt ties the strands together so they run as one unit across a multi-groove drive.
When a belt has run, the marking on the back is often the fastest way to identify it. Read the profile and the length from the old belt and compare them with this listing. If the printing has worn off, measure the outside length and note the number of ribs and the groove profile of the sheaves.
On drives that use more than one belt, replace the full set at the same time so the load stays even across the strands. Inspect the sheaves for wear, alignment and debris while the belts are off, and check the tension after the first run-in period.
We carry the Optibelt 8V KB 1060 BP and quote by part number. Send the part number, the quantity and your delivery city by WhatsApp or email, and our team can confirm the belt or suggest an equivalent.
Dimensions
- Length
- 2692mm
Frequently asked questions
- What do the profile and length tell me about this belt?
- The 8V profile identifies the cross-section that must match your sheave grooves, and 2692 mm is the length given for this belt. Both figures need to match the belt you are replacing.
- How do I confirm the right belt before ordering?
- Read the marking on the back of the old belt and compare the profile and length with this listing. If the marking is worn, measure the outside length and note the sheave groove profile.
- What do I send for a quote?
- Send the part number 8V KB 1060 BP, the quantity you need and your delivery city by WhatsApp or email. Our team replies promptly and can help confirm the belt or suggest an equivalent.