V-belt Optibelt 8V 3350
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 8V
- Series
- SK S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
DODGE and OPTIBELT: matching part numbers →GATES and OPTIBELT: matching part numbers →MITSUBOSHI and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 8V 3350 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8V 3350 and any equivalents.
When you pull a worn belt off a drive, the marking on the back is the fastest way to identify what to replace it with. This page covers the Optibelt 8V 3350, an SK S=C Plus narrow wedge V-belt in the 8V profile with a length of 8509 mm. Read the old belt before you order, then send us the number you find.
The back of a used belt usually carries the profile and the length designation stamped or printed on the jacket. If that marking reads 8V 3350, this Optibelt SK S=C Plus belt matches it: 8V profile, 8509 mm length. Wipe the belt clean first, since oil, dust and abrasion can obscure the characters, and check a second section of the belt if the first is unreadable.
Where the old marking is gone or worn through, measure and note the drive instead: sheave groove profile, number of grooves, and the belt's own dimensions. Send whatever you have by WhatsApp or email and the team will confirm the 8V 3350 or suggest an equivalent. The same size is also listed under Mitsuboshi 8V 3350.
Narrow wedge belts are commonly replaced as a set on multi-belt drives, so note how many the drive takes before you order. If the drive runs several belts, tell us the quantity and we will quote the full set rather than a single belt.
Dimensions
- Section
- 8V
- Length
- 8509mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Read the marking on the back of the belt you are replacing. If it shows 8V 3350, this Optibelt SK S=C Plus belt is the matching profile and length. If the marking is unreadable, send us the drive details and we will help confirm it.
- What do I need to send for a quote?
- Send the part number 8V 3350, the quantity you need, and any marking details from the old belt. Photos of the belt back and the sheaves help us confirm the profile and length.
- Is this size listed under other brands?
- Yes. The same size is also listed under Mitsuboshi 8V 3350.