V-belt Optibelt 8V 3150 BP2
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 8V
- Series
- Blue Power 2
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 8V 3150 BP2 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8V 3150 BP2 and any equivalents.
This Optibelt 8V 3150 BP2 belt is a narrow wedge V-belt from the Blue Power 2 series. It is used in heavy-duty industrial drives where a compact, high-capacity belt is required. To confirm fit, match the profile and the length on the old belt to the 8V profile and 8001 mm length shown here.
Narrow wedge V-belts like this 8V profile are common on high-power drives such as large fans, compressors, crushers, and process equipment. The 8V profile is a narrow cross-section, so it transmits more power per belt width than a classical V-belt. This belt is 8001 mm long, which suits long center-distance drives.
Before ordering, check the marking on the back of the existing belt. You should see the profile and the length; for this belt that is 8V and 8001 mm. Also inspect the sheaves for wear, proper alignment, and correct groove profile. If the drive uses multiple belts, replace them as a set so the load is shared evenly.
If the marking is worn or unreadable, measure the outside length and the top width to confirm the 8V profile and 8001 mm length. Send the part number 8V 3150 BP2, or your measurements and a photo of the drive, and we will help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- 8V
- Length
- 8001mm
Frequently asked questions
- How do I confirm that this 8V 3150 BP2 belt fits my drive?
- Check the marking on the back of the old belt. It should show the profile and length. This belt is 8V profile and 8001 mm long. If the marking is not clear, measure the outside length and top width to confirm.
- Can I replace just one belt on a multi-belt drive?
- For even load sharing, replace all belts in the set at the same time. Mixing new and worn belts can cause the new belt to carry more load and wear faster.
- What information do you need to quote this belt?
- Send the part number 8V 3150 BP2, or the profile and length from the old belt. If you have measurements or a photo of the drive, include those to help us confirm the correct belt.