V-belt Optibelt 8V 2360
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 8V
- Series
- SK S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
DODGE and OPTIBELT: matching part numbers →GATES and OPTIBELT: matching part numbers →OPTIBELT and STARK: matching part numbers →MITSUBOSHI and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 8V 2360 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8V 2360 and any equivalents.
This Optibelt 8V 2360 is an 8V narrow wedge V-belt from the SK S=C Plus series. It is the belt to specify when you are replacing an existing 8V 2360 and need the same profile and length. The same size is also listed under Stark 8V 2360 and Mitsuboshi 8V 2360.
To match it to the belt being replaced, read the marking on the back of the old belt. Confirm the profile is 8V and the length is 2360 inches, which corresponds to 5994 mm. The part number 8V 2360 combines both, so it is the quickest reference to compare. If the old belt is worn or the marking is unreadable, measure the length and check the profile against the drive sheave groove.
The 8V profile is a narrow wedge V-belt, used where a higher power density is needed compared to classic V-belts. The SK S=C Plus series is built for industrial drives. This belt is 5994 mm long. When you replace it, inspect the sheaves for wear, alignment, and correct groove profile. On multi-belt drives, replace all belts in the set at the same time to keep load sharing even.
Dimensions
- Section
- 8V
- Length
- 5994mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Check the marking on the back of the belt you are replacing. It should show 8V 2360. The profile is 8V and the length is 5994 mm. If the marking is missing, measure the outside length and compare it to 5994 mm, and verify the sheave groove is for an 8V profile.
- What should I send to request a quote?
- Send the part number 8V 2360, the quantity, and any details from the old belt marking. If you are unsure between this and another size, include the drive make and model and the sheave diameters. We will confirm the belt or suggest an equivalent.
- Are there other brands for the same size?
- The same size is also listed under Stark 8V 2360 and Mitsuboshi 8V 2360. If you prefer one of those, include it in your request and we will check it for you.