V-belt Optibelt 8V 2240 BP2
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 8V
- Series
- Blue Power 2
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 8V 2240 BP2 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8V 2240 BP2 and any equivalents.
This is an Optibelt 8V 2240 BP2 narrow wedge V-belt from the Blue Power 2 series, supplied by MR Industrial Accessories LLC. It has an 8V profile and a length of 5690 mm. Before you fit it, take the time to inspect the drive and its sheaves.
A new belt on a worn or misaligned drive will not run as intended. Check the sheave grooves for wear, scoring, or a polished floor that indicates the belt has been slipping. Confirm the sheaves are aligned and that the grooves match the 8V profile. Look at the bearings, the shaft, and the mounting of the driven and drive units for anything loose or shifted.
If several belts run together on the same drive, replace them as a set rather than mixing a new belt with used ones. Confirm the part number on the old belt before ordering: the marking on the back should read 8V 2240 BP2. The 8V profile and the 5690 mm length are the two values to match.
To request a quote, send the part number 8V 2240 BP2 by WhatsApp or email. If the belt on the machine is marked differently or the marking is no longer readable, send a photo of the drive and the sheave dimensions and the team can help confirm the right belt.
Dimensions
- Section
- 8V
- Length
- 5690mm
Frequently asked questions
- What do I need to send for a quote on this belt?
- Send the part number 8V 2240 BP2 by WhatsApp or email. If you are replacing a belt on an existing drive, include the marking from the back of the old belt so the profile and length can be confirmed.
- What should I check on the drive before fitting an 8V 2240 BP2?
- Inspect the sheave grooves for wear and scoring, confirm the sheaves are aligned, and check that the grooves match the 8V profile. Also check bearings, shafts, and mountings for anything loose before the new belt goes on.
- Should I replace all belts on the drive at the same time?
- Yes. Where multiple belts run together on one drive, fit a matched set rather than mixing a new 8V 2240 BP2 with used belts, so the load is shared evenly.