V-belt Optibelt 8V 1180

OPTIBELT 8V 1180 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 8V 1180 and any equivalents.

This Optibelt 8V 1180 is a narrow wedge V-belt from the SK S=C Plus series. The 8V profile and 2997 mm length are the two numbers to match against your drive. Use them to confirm the belt will sit correctly in the pulley grooves and run at the right center distance.

The 8V profile is a narrow wedge cross-section, often called a wedge belt. It is used where a standard V-belt would be too wide for the power the drive needs to carry. The 2997 mm length is the datum length for this belt. When you check a replacement, compare both the profile and the length to the marking on the old belt rather than measuring around the outside.

The same size is also listed under Dayco 8V 1180. If your drive currently runs that reference, this Optibelt belt is the same profile and length. For a quote, send the part number 8V 1180 and the quantity you need. If you are unsure whether this is the correct belt for your drive, send a photo of the back of the old belt and the pulley dimensions, and the team can help confirm it or suggest an equivalent.

Inspect the pulleys and the other belts on the drive before fitting a replacement. Worn grooves or mismatched belts can shorten belt life. If the drive uses more than one belt, replace them as a set so the load stays even across all belts.